Homemade farkels/accessories thread

[CDA441]

It is weird that I can't seem to find a thread with only homemade accessories/mods on the NC700 forums. Some people are incredibly handy in making things themselves, and I'm stoked to see your own DIY creations.

I'll start:
I didn't have any cash in hand to get a rear hugger or a shocktube to protect the rear shock. I then looked at this topic from 2013 and saw some DIY fender extensions.
I thought I'll make one myself from a flower pot, and it did come out nicely:

It doesn't rub on anything and is mounted securely using double sided tape and 2 zip ties.

And since I'm already snipping that flower pot, I also got some hose clamps (diameter 43-80mm) and cut some fork seal protectors. They keep bugs and dust from getting on the dust seals. Sure they cost 8€ on the NC700 shop, but this is much more cost effective.

In the same photo you can see I've made a mesh radiator protector. The mesh is from a trashcan I bought in a discount store for around 1€.
Those were the remains of the trashcan, because I already made one for my previous bike.
It actually does fit nicely, but it's sharp on the corners.

Total costs of these mods: around 5€ (flower pot: 1,50€, trashcan: 1€, 2 hose clamps: 2€, pack of zip ties: 0,50€)

Well, if you have some homemade accessories/mods that you want to show off, then this is the thread you're looking for!

 

[PapaC]

Well done! I just bought a windscreen pouch to keep small stuff handy. It's designed for windscreens that have the aluminum bar across. Mine does not have one so I'm in the process now of how to make a mount for it. I'll post it after I figure it out.

 

[CDA441]

This thread is almost abandoned, no one that makes their own accessories here or am I the only hobbyist here?

Anyways, I've bought a new phone and a new windschield (OEM Honda touring shield) and want to build my own "easy to take out but secure when riding" cellphone mount.
It's still a work in progress (need to find a suitable mount), and I still need to receive my windshield.

I took pictures with the new phone (Samsung Galaxy S8+) because I don't have another camera at hand.
The phone just slides in, and when the charging cable is inserted, the phone will be locked to the dock and can't fall out.

To remove the phone there is a hole in the back where you can push the phone out (after removing the charging cable).
The only button that works is the lock button when it's in the dock.
The cool thing is that the dock also doubles as a sun visor, which is also extendable when I velcro an extra piece of PVC plate to the top.

There are also drain holes because when it rains, it can drain.
Still thinking about the mount though, because RAM mounts are expensive.
Maybe a knockoff could work too?

 

[StratTuner]

This thread is almost abandoned, no one that makes their own accessories here or am I the only hobbyist here?

Well... I make some things from scratch

• front shock boots
• radiator cover
• fender extender extender
• windscreen (the link on this is NOT mine)
• rear shock protective cover
• instrument shade covers
• rear shock "bootie"
• fittings for saddle bags

other things, I buy and attach...

• heated grips, seat
• highway pegs
• RAM mounts for GPS/phone

Like you, I'm a great fan of the home made.

 

[Harvey]

I'm keen to see if anyone has a DIY rear rack.

 

[StratTuner]

I'm keen to see if anyone has a DIY rear rack.

I do not have pictures, but I did try to make the "arms" that support the rear rack once. I used heavy flat bar for construction, and the result was ugly (even for me), and not very strong. It was also costly, so I relented and went with the "Givi" arms. [HERE]

The platform itself comes with the top box mentioned in the post. It may also be bought separately if you want to easily move the top box between different bikes.

Using google to search the forum, I also found [THIS] home-made rack (arms anyway). It has pictures, and it looks a lot stronger than flat bar. Seems like you'd need specialized tools to bend the steel bars.

Using google to search this site....
at the google seach page, or just in the URL bar at the top of your browser, type

"site:<exact site URL> <keyword1> <keyword2>"

example:
site:h_ttps://www.nc700-forum.com top box strattuner

the _ in h_ttps is there ONLY to keep the forum from putting in the URL equivalent.
DO NOT include the underscore character in your google search.

 

[lue42]

I'm keen to see if anyone has a DIY rear rack.

Your best bet is to go with the rear rack support arms like the 1111FZ from Givi or equivilent from other manufacturer. Hand making that part in a safe, good looking and inexpensive would probably not be worth your time or effort.

Givi 1111FZ Top Case Support Brackets Honda NC700X 2012-2015 | 10% ($11.20) Off! - RevZilla

From there you have a flat surface which you can attach anything you want and that is where your DIY can run free

 

[StratTuner]

Your best bet is to go with the rear rack support arms like the 1111FZ from Givi or equivilent from other manufacturer. Hand making that part in a safe, good looking and inexpensive would probably not be worth your time or effort.

Givi 1111FZ Top Case Support Brackets Honda NC700X 2012-2015 | 10% ($11.20) Off! - RevZilla

From there you have a flat surface which you can attach anything you want and that is where your DIY can run free

Yep, that's the best advice. ☺

 

[CDA441]

Well if I could weld (or should I have a welder) i'd be making a lot more homemade stuff for my bike!
IF, then the mount would be made out of thin steel instead of plastic, and will be a lot stronger.
I was already thinking about getting a flux core cheapo welder for about 150€, but the steel stock will cost a lot more lol

 

[StratTuner]

Well if I could weld (or should I have a welder) i'd be making a lot more homemade stuff for my bike!
IF, then the mount would be made out of thin steel instead of plastic, and will be a lot stronger.
I was already thinking about getting a flux core cheapo welder for about 150€, but the steel stock will cost a lot more lol

I admire your DIY spirit, still, there are some cases where it's cheaper and more efficient to buy someone else's engineering.

 

[CDA441]

I admire your DIY spirit, still, there are some cases where it's cheaper and more efficient to buy someone else's engineering.

Well sometimes you need something special, and making it yourself seems better because you can add your own stuff to it. Like for instance the phone holder. That doesnt exist for my specific phone and case combo
Or it is only available in specific countries and shipping is not an option, but its true, some things are better when they're bought

Envoyé de mon SM-G955F en utilisant Tapatalk

 

[StratTuner]

From there you have a flat surface which you can attach anything you want and that is where your DIY can run free

Exactly! You might attach [THIS] "Oxford top case base" which happens to be the exact same platform that comes with the cheaper TMS TBOX-JK2016-K Matte Black X-Large [HERE] top box.

To make it a little more home-made, I removed the red lens and put [RED LED strip lights] under it. There is an electrical SAE quick connect installed on the platform to power it...connected to the brake light lines above the rear wheel.
[SAE connectors]

 

[Dennis M]

I built this rack with fuel hole that replaces the rear seat out of scrap wood that I had on hand.


The only problem with it is I can't raise my leg enough to get on the bike if I actually use this rack for it's intended purpose. The only way I can get on is by swinging my leg over the rear seat while leaning my upper body way forward, I broke my right leg 50 years ago, Army Docs put a pin in it but I still have a limited range of motion with it, plus I'm getting old.

 

[Tiny Tim]

Your best bet is to go with the rear rack support arms like the 1111FZ from Givi or equivilent from other manufacturer. Hand making that part in a safe, good looking and inexpensive would probably not be worth your time or effort.

Givi 1111FZ Top Case Support Brackets Honda NC700X 2012-2015 | 10% ($11.20) Off! - RevZilla

From there you have a flat surface which you can attach anything you want and that is where your DIY can run free

I made one for my previous bike. Make sure you use "seamless hydraulic pipe" Available from any Hydraulic Supplies Specialist in 9' or 12' lengths. Then, if you can, get it powder coated

 

[Tiny Tim]

I built this rack with fuel hole that replaces the rear seat out of scrap wood that I had on hand.
View attachment 35872View attachment 35873

The only problem with it is I can't raise my leg enough to get on the bike if I actually use this rack for it's intended purpose. The only way I can get on is by swinging my leg over the rear seat while leaning my upper body way forward, I broke my right leg 50 years ago, Army Docs put a pin in it but I still have a limited range of motion with it, plus I'm getting old.

I've had a hip replacement. To get on a fully loaded-up bike, I put it on the main stand and utilise the left footpeg. Getting off, I put it on the side stand and CAREFULLY get off via the left footpeg.

Of course there's always the "leapfrog the top box" method like The Loan Ranger!

"HI-Ho Silver, - Away"!

Just mind you don't overshoot and crush your valuables on the frunk!

 

[dduelin]

Having made a variety of things myself for my stuff I get the "made it myself" vibe but white zip ties? Two black screws won't break the budget.

 

[670cc]

Having made a variety of things myself for my stuff I get the "made it myself" vibe but white zip ties? Two black screws won't break the budget.

Speaking of that, having been in a business involving installation and repair of electrical equipment, I’ve used thousands and thousands of zip ties (or as we called them, tie wraps). But it wasn’t until a couple years ago that I discovered there are indoor and outdoor zip ties. As a general rule, the white ones are indoor only and the black ones are indoor/outdoor. Something is different about the plastic. I’ve personally witnessed the white ones getting brittle and breaking when left in the sun. So, for vehicle, use, I always use black/outdoor zip ties.

 

[potter0o]

Speaking of that, having been in a business involving installation and repair of electrical equipment, I’ve used thousands and thousands of zip ties (or as we called them, tie wraps). But it wasn’t until a couple years ago that I discovered there are indoor and outdoor zip ties. As a general rule, the white ones are indoor only and the black ones are indoor/outdoor. Something is different about the plastic. I’ve personally witnessed the white ones getting brittle and breaking when left in the sun. So, for vehicle, use, I always use black/outdoor zip ties.

With no informed opinion it may be UV protection has bee added to the plastic for the outdoor ones. I have heard of powder coating breaking down when when an interior powder coat was used as it did not included the UV protection. The internet and free opinions

 

[Tiny Tim]

With no informed opinion it may be UV protection has bee added to the plastic for the outdoor ones. I have heard of powder coating breaking down when when an interior powder coat was used as it did not included the UV protection. The internet and free opinions

Speaking WITH informed opinion, you are 100% correct Sir. The same applies to Polyethelene or PVC communication and electrical cable. White PE/PVC will break down and crack over time due to UV light. Black does indeed have UV protection and is less inclined to crack and degrade as White does.

 

[Convict1997]

I made a set of saddlebag supports from 3/8 steel rod.