Saddle bag plate lock

ti_ti_ta

New Member
Joined
Feb 13, 2021
Messages
23
Reaction score
18
Points
3
Location
Dallas, TX
Visit site
So I recently bought my '16 nc700xd and it came with saddlebags. Seller also gave me locks they never installed. However I'm also missing the plate that goes into the lock itself. It's #5 in this diagram.


Local dealer says since it doesn't have an individual part number they can't order it. Any ideas? I don't really want to permanently install them since I do take them off/put them on quite frequently depending on what I need to take to work each day.
 

ti_ti_ta

New Member
Joined
Feb 13, 2021
Messages
23
Reaction score
18
Points
3
Location
Dallas, TX
Visit site
So this is a bit much of an ask. Any chance someone will take the cam plate/lock plate thing off their bike, trace and measure it, and send me the specs? Or better yet if anyone on the southern side (Duncanville) of Dallas wants to let me take a look at theirs.
 

MZ5

Well-Known Member
Joined
Nov 10, 2012
Messages
1,815
Reaction score
167
Points
63
Location
Arizona, USA
Visit site
I haven't been able to find anything on the bay. Think it's something I could fabricate?
I haven't disassembled mine. Maybe... I think I could do the bends with a vice and vice grips in a pinch, but a brake would be better. Then maybe drill and then cut with a hacksaw, or something like that?
 
Top