survival bike anyone?

[ziggie]

Survival ? Motoped
This thing is kewl,would be a fun toy.

 

[Old Can Ride]

35 inch seat height. A real tall fellow, with a big inseam might be able to ride this one!

 

[ziggie]

I could use a box to stand on to get on it like I did as a kid, only problem is getting off.

 

[davidc83]

35 inch seat height. A real tall fellow, with a big inseam might be able to ride this one!

Seat height is adjustable, looks like a bicycle seat with the same type of adjustments.

 

[kpinvt]

Video:
https://www.youtube.com/watch?v=0aVf5DX7BG0

TURN DOWN YOUR SPEAKERS!

The road less travelled:
https://www.youtube.com/watch?v=U4-lmgqXuLU

 

[vodapas]

Oh lord, its got a crossbow mounted on it in one of the pics. Why don't they just call it TWD Daryl Edition?

 

[Deckyon]

Seems like a capable little bike. And you could trailer it behind the NC. I do like the thought and look of the survival bike. While I am a zombie fanatic, I don't like the BlackOps version. Just doesn't sit well visually for me. Wish I would have had something like this when I was a kid. No complaints with the Yamaha Razz I had, but it's off-road capability was quite limited.

 

[Deckyon]

Oh lord, its got a crossbow mounted on it in one of the pics. Why don't they just call it TWD Daryl Edition?

Licensing.

 

[davidc83]

Too much $$$ for a moped.

 

[itlives]

Will it survive an EMP? That is the question.

I like it a LOT! I wonder if the two 1 gl. gas tanks are Rotopax. I was thinking of painting my NC Army green and those green tanks mounted like OCR has his, would be sweet!

 

[casualmatt]

Notice the "What is not supplied?" section

Frame Kit:

• Frame – Custom Motopeds
• Subframe – Custom Motopeds
• Swing Arm – Custom Motopeds
• Pivot Plate – Custom Motopeds
• Jackshaft – Custom Motopeds
• Bottom Bracket – Custom Motopeds
• Rear Hub – King Kong Custom Motopeds
• Muffler & Exhaust - Custom Motopeds
Full Bike Components:
• Fork – DNM USD-8
• Shock – DNM Burner-RCP2
• Headset – VP Components A97AC
• Stem – Answer Rove DJ Stem
• Handlebars – Pro Taper 6061 720mm, 45mm rise
• Brakes – Hayes Ace, Forged Mono-Bloc 4-Piston Caliper
• Rotors – Hayes 224mm (9 inch)
• Chains – KMC Bicycle & 420 Motorcycle
• Crankset – Samox CW Forged 165mm 5 arm AF23-U34A Square Taper
• Chainwheel – Alloy 34T THICK 5.0MM
• Throttle & Cable – CRF50/70
• Freewheel – 14 tooth
• Pedals- VP Components 531E
• Front Rim – Alex Rims 26” (559mm×32mm) 32H ERD: 546
• Rear Rim – Alex Rims 24” (507mm×50mm) 36H ERD: 495
• Front Hub – King Kong GTH6
• Rear Hub – King Kong Custom Motopeds
• Spokes – 13 Gauge Stainless Steel
• Nipples – 13 Gauge Brass
• Front Tire – Duro Razorback 26×2.6 DB-1006 Wire Bead Motocasing
• Rear Tire – Duro Razorback 24×3 DB-1006 Wire Bead Motocasing
• Tubes – Duro 26x2.25, Duro 24x3
• Seat – SDG (Honda CRF/XR50)
• Plastics – SDG (Honda CRF/XR50)
Chains:
• 100 link 420
• 46 link 420
• 45 link 1/2" x 1/8" (The 45 link requires a half link)
What is not supplied?

• Engine: Honda XR/CRF 50/70cc or Clone (E22 Engine Design)
• Wiring Harness – 12v Wiring Harness 3 Plug Type
• CDI – Standard 12V CDI
• Ignition Coil
• On/Off or Kill Switch
• Spark Plug – 10mm
• Carburetor – 19mm Min.
• Air Filter – Uni, Twin Air, K&N, etc.
• Kick Starter – Curved Style
• Voltage Regulator – 12v (For lighting kits)

 

[fratermus]

There are tons of great motoped vids on youtube.

I'd still pick a 250cc dualsport, klr, or dr650 as a survival bike.