Will seat and oem luggage from NC700X fit the NC750X?

TacomaJD

Well-Known Member
Joined
Apr 30, 2019
Messages
1,212
Reaction score
407
Points
78
Location
Northeast Alabama
Visit site
I am seriously planning to pick up a new NC750X sometime this year. It would be my "street" bike, and I would use my current 700 mostly for track riding only. If I do this, I would like to swap things off of my 700 to the 750 like the Seat Concepts seat, oem Honda luggage and rear rack, and the Yoshimura exhaust, and put the oem seat and exhaust from the 750 on the 700 track bike. (If they are compatible).

I'm pretty sure the exhaust is same between all years/models, but I'm unsure about the seat and luggage. Anybody know?
 

670cc

Super Moderator
Staff member
Super Mods
Site Supporter
Joined
Aug 7, 2012
Messages
8,411
Reaction score
1,562
Points
113
Location
USA
Visit site
I think people would need to know the model year of your 700 to give you any advice. The NC700X came in two different body styles.
 

TacomaJD

Well-Known Member
Joined
Apr 30, 2019
Messages
1,212
Reaction score
407
Points
78
Location
Northeast Alabama
Visit site
I figured it was a given that I wasn't comparing a new model 700 to a 750, because they are pretty much the same minus the engine. Oh well, its the old style 700 (2013) and will either be buying a 2018 or 2020. Probably 2018 if I can find a good deal in one. Not interested in 2019 models because I hate blue.

Already saw a guy on here put a new model oem exhaust off the 750 onto an older 700, so i know that will work.

I suppose I could look up aftermarket seat models with various manufacturers and see if any say one model fits all years. Not sure on the honda luggage though.
 

Jt105

Active Member
Joined
May 1, 2018
Messages
569
Reaction score
100
Points
43
Location
Michigan, USA
Visit site
I don’t recall anyone swapping luggage from an old 700 to a new 750. You could look at the part numbers for the luggage mounts to see if they are the same.
I know the 2016 model came with rear side plastics that were slightly different in some way and caused fitting issues with some aftermarket rear racks mounting brackets. Not sure if that affects OEM.

JT
 

HarveyM

Active Member
Joined
Apr 28, 2016
Messages
553
Reaction score
81
Points
28
Location
Ottawa, Ontario
Visit site
The rear plastics are different on them. I'm not sure about the OEM luggage, but Givi racks that attach under the seat grab bars changed between generations
 

TacomaJD

Well-Known Member
Joined
Apr 30, 2019
Messages
1,212
Reaction score
407
Points
78
Location
Northeast Alabama
Visit site
I'd think as long as the grab handle mounting locations and the plastic cutouts surrounding them didn't change, then the oem luggage would interchange. I guess the best way to figure that out would be to cross reference part numbers for the luggage style grab handles and brackets between the year models to see if they are the same. I know I have seen pics of the oem panniers on the 750's, but hard to tell if there is a change in the handles/brackets.

I will dig more into this when I get time and post what I find here.
 

mercurydog47

Member
Joined
Dec 10, 2012
Messages
140
Reaction score
2
Points
18
Location
northern california
Visit site
I am seriously planning to pick up a new NC750X sometime this year. It would be my "street" bike, and I would use my current 700 mostly for track riding only. If I do this, I would like to swap things off of my 700 to the 750 like the Seat Concepts seat, oem Honda luggage and rear rack, and the Yoshimura exhaust, and put the oem seat and exhaust from the 750 on the 700 track bike. (If they are compatible).

I'm pretty sure the exhaust is same between all years/models, but I'm unsure about the seat and luggage. Anybody know?
The seats are identical. I swapped a Corbin seat custom made for my 2012 model straight onto my new 2018 model. Both were NC DCTs.
 
Top