Search results

I have a pair of Morimoto M Bi-LED projectors and ballasts that I never got around to installing on our car before we got rid of it. I already retrofitted my NC700 with a Morimoto Bi-Xenon projector so I have no use for these on my bike. The only missing part is the adapter to go from our H4...

Some winter projects for the bike. Radiator guard: Givi tire hugger: Installed power distribution block: Working on HID conversion:

Rode about 1.5 hours to visit some friends and helped them set up camp. Couldn't stay because of prior obligations. Maybe this weekend though.

Finally got the bike registered on Friday. Put 160 miles on it this weekend puttering around the area. Givi V47 ordered and should arrive Friday. I'm going to attempt to commute to work tomorrow with my workout gear stuffed in the frunk and my work gear on a backpack while I wait for the Givi...

Thanks for the link. That's going to be very helpful down the road as I plan out my install. From the schematic it looks like any pink/blue wire will be accessory, but the turn signal relay sounds to be the most accessible.

GregC, the more I'm reading up on these power blocks, the more I'm liking that Innovv Power Hub you posted. Where did you connect the yellow wire? Do you have pictures of the installation?

Sorry about my link not working. It is Painless Wiring model 70207 (half always on, half acc on) and model number 70217 (all circuits acc on). It's basically the same thing you linked, only pre-wired with a relay, circuit breaker, and harness and you only get 7 channels because one channel is...

Thanks for the link. That's pretty slick, but isn't that just a glorified relay and power distribution block that's weather resistant? I don't have the accessory relay nor the accessory sub harness. I was thinking I could add the accessory relay and fuse, but adding the harness seems like a...

Bringing this back from the dead. I just got my NC700 and I need to fix the previous owners accessory light hack job and add my own accessories. I just found this product by Painless and it looks like a solid solution. Only problem is it might be too big to stuff under the plastics, so it...

After doing some additional research I came up with a wiring diagram for my accessories (see below). Other option is to just pony up some bucks, buy this, and save myself some time. Only issue will be where to install it. I'm guessing this won't fit in the gap next to the air filter housing...

Thanks. Quick question. This add-a-fuse the previous owner installed isn't necessary and I'd like to remove it because it prevents the fuse cover from fully closing. It's essentially a fused wire that's triggering the driving light relay to turn on. Fusing this isn't necessary. What's the...

Last night I took apart the plastics just to check the air filter and the fog light install job. All I have to say is wow, whomever installed the driving lights did an okay job, but it's definitely not clean. Two wires coming off the battery for power and ground, they fused the power wire...

I just bought a 2012 NC700X off of CraigsList with 17700 miles on it. This is my first motorcycle. It already has some decent accessories: Honda tall windscreen, Givi racks, Tourtech crash bar, bar risers, GPS mount, and LED running lights. The guy I bought the NC700X from didn't know much...