NC700s brake pads

[DougNZ]

Hi guys, I bought a pair of front brake pads for my 2014 NC700S. I had an email exchange with Pyramid in the UK and they said my bike must be a 2013 as that was the last year of the NC700s. Mine is manual and not ABS.
They advised me to buy part number PP388 which I did.
Just tried to fit these and mine are smaller than the PP388 pads, photos attached.
So as Pyramid don't seem to know their own products could someone here tell me what the correct front pads from Pyramid are?
I know I'll get lots of advice to buy OEM......but I really just want to know the correct Pyramid part number if anyone knows it.
Thanks!

 

[potter0o]

What is the overall length of your existing pad?

 

[DougNZ]

What is the overall length of your existing pad?

I've put them back in the bike now but they are roughly 10cm - 4 inches based on the photos I took

 

[potter0o]

There is a pp196 that is 102mm.

I found this by looking up a 2014 NC750S. Is it possible that your bike is a 750S or has a 750S brake?

I used the vin on my bike to confirm it matches on the site below:

https://www.bike-parts-honda.com/honda-motorcycle/search_vehicle/chassis

 

[DougNZ]

There is a pp196 that is 102mm.

I found this by looking up a 2014 NC750S. Is it possible that your bike is a 750S or has a 750S brake?

I used the vin on my bike to confirm it matches on the site below:

https://www.bike-parts-honda.com/honda-motorcycle/search_vehicle/chassis

There is a pp196 that is 102mm.

I found this by looking up a 2014 NC750S. Is it possible that your bike is a 750S or has a 750S brake?

I used the vin on my bike to confirm it matches on the site below:

https://www.bike-parts-honda.com/honda-motorcycle/search_vehicle/chassis

Thanks for that! I'm sure its a 700 with stock Nissin caliper. But I'll punch my engine number into that website, cheers!

 

[DougNZ]

Update - potter was correct, the front brake pads are PP196 from Pyramid.
My rego papers (I'm from New Zealand ) for my bike say it is a 2014 model. However using the VIN checking website https://www.cyclepedia.com/motorcycle-vin-decoder/ its actually a 2012 model. These bike are low sellers in NZ so it must have sat around for a while.
So for a 2012-13 NC700s non ABS and manual gearbox the correct pads made by Pyramid are PP196.
Cheers!