Search results

Put a Scottoiler eSystem on your bike & the chain & sprockets will last much longer. My NC has 20,000 on it & the sprockets look like new ones.

My bike is a DCT model. I tried to, but when I killed the power to the unit, it did something to the pulse circuit and the transmission went into a neutral type mode. When I stopped the bike, I could hear the transmission trying to find first gear. I shut off the bike, turned the cruise back...

The Rostra is electronic & does not need a vacuum reservoir.

I just returned from a 3100 mile trip. It worked good.

Just put a new Metzler on the rear of the NC. The old one had 8,500 miles on it & was not quite down to the wear mark. I am getting ready for a 4,000 mile trip & knew the tire would not make it & do not want to take the Wing. When I removed it from the rim, there was a small nail inside. The...

After you remove the air cleaner box & the radiator so you can see what you are doing, it will be quite obvious where the cable will need to be. I fastened mine with a black plastic thing that is designed to go into a square hole in a bracket that came with the cruise in the end of the cable & a...

The mounting of the cable will be obvious once everything is removed so you can see how much room you have. The kit comes with a plastic nut thing that is designed to go thru a square hole in a bracket. I put it on the cable end and used a very heavy wire tie to put it were it needs to go for...

I found one on ebay that a fellow bought to put on a car, then he got rid of the car before installing it. It is a 250-1223, and came with a 250-3742 switch. My NC is a DCT model. I moved the parking brake to the right and made a bracket to mount the switch on. It looks professional. I also...

Because someone may follow my instructions & have a accident, then blame me, I do not want to tell anyone how to do it. But here is a short description. I used a cable thing that had a loop in one end & installed under the pull cable were it attaches to the throttle body. The control unit is...

Get a Air-Hawk seat cushion.

I installed a Rostra on my NC700X DCT. It was a lot of thinking. There is very little room to work, however it can be done. I used a 4 into 1 splitter and taped into the vs signal at the transmission. I had to make a shield out of aluminum foil and duct tape to get it to work. I mounted the...

I use a Barpack map holder from Aerostitch Barpack :: Aerostich/RiderWearHouse Motorcycle Jackets, Suits, Clothing, & Gear It uses clips that go on the handlebar. Mine is about 10 years old & has been on many bikes over the years. One thing I have learned from experience, put your map in a...

Here are some photo's. I mounted a Scottoiler e-system to the one on the left. I bent the tubing with a conduit bender.

The Honda rack, it is made of plastic

Worrying about the rear rack cracking from hitting bumps, I designed a brace to strengthen it. I bought 2-3' lengths of 1/2 "hollow round stock. I bent them 90 degree on one end and pounded about 8" flat on the other end. Next find a short piece of round stock that fits into the hollow tubing...

I would pay $800 or more for one. I have one on my Silver Wing scooter. Once you have something like that, you want one on all your bikes. Keeping the speed limit is no problem and you are safer because you don't have to keep taking your eyes off the road to look at the speedometer.

I just checked there site, the # 1 bike they are looking for is the NC700, hopefully someone will let them use there's. If I lived there, it would be mine.

A friend told me that if you have a car tire on your motorcycle and get in a wreck, your insurance will not cover you. He owns a motorcycle shop.

If the fuse is to big, the wire becomes the fuse. NOT GOOD

I emailed them yesterday 05/02/2014 asking if they had anything in the works for a NC700X DCT. The reply I received from Tony Guymer says {I have seen the bike, but not had access to one for development. Yours is the first enquire. We will have to see what the future brings in terms of demand...