spets
Member
Hey guys,
Just wanted to let you guys know that I finally found a functional LED flasher! If you search for a CBR600 LED flasher, you'll come across this 4-pin flasher:
New 07 11 Honda CBR600RR CBR 600 RR LED Flasher Relay 4 Pin | eBay
It works perfectly with no hyperblinking. The only functionality you loose is the ability to turn on the hazard lights with the bike off. I secured it to the bike by undoing one of the fairing screws in the compartment and threading it through the flasher tab, like so:
I am running them with these LED bulbs from SuperBrightLEDs in 1157/1156 sizes, using the OEM CBR clear "smoked" covers in place of the amber ones, Part Numbers 33652-MFL-307 LENS & SCREW SET, L. and 33602-MFL-307 LENS & SCREW SET, R.
https://www.superbrightleds.com/mor...-smd-led-tower-bay15d-retrofit-car/1644/4168/
I previously tried using the Luckybike LED flasher (that looks just like the OEM unit). It worked for (2) out of (4) LED bulbs but started hyperflashing when I put all (4) bulbs in. Per one of the other threads on here I removed two of the resistors, but it still hyper flashed when cold. I removed the 3rd resistor, it worked when cold, but didn't work under the sun when warm.. Sigh..
Just wanted to let you guys know that I finally found a functional LED flasher! If you search for a CBR600 LED flasher, you'll come across this 4-pin flasher:
New 07 11 Honda CBR600RR CBR 600 RR LED Flasher Relay 4 Pin | eBay
It works perfectly with no hyperblinking. The only functionality you loose is the ability to turn on the hazard lights with the bike off. I secured it to the bike by undoing one of the fairing screws in the compartment and threading it through the flasher tab, like so:
I am running them with these LED bulbs from SuperBrightLEDs in 1157/1156 sizes, using the OEM CBR clear "smoked" covers in place of the amber ones, Part Numbers 33652-MFL-307 LENS & SCREW SET, L. and 33602-MFL-307 LENS & SCREW SET, R.
https://www.superbrightleds.com/mor...-smd-led-tower-bay15d-retrofit-car/1644/4168/
I previously tried using the Luckybike LED flasher (that looks just like the OEM unit). It worked for (2) out of (4) LED bulbs but started hyperflashing when I put all (4) bulbs in. Per one of the other threads on here I removed two of the resistors, but it still hyper flashed when cold. I removed the 3rd resistor, it worked when cold, but didn't work under the sun when warm.. Sigh..