Mikee3544
Member
I bought a pair of soft bags, which were mounted under the passanger's seat.
On the 1st pictures here they are, almost under the seat, with no support frame.
So I decided to create a side holder - it took me 2 weeks to figure out which would be the best solution for this. And also the cheapest.
Got a pair of 15" monitors' flat stand and removed the plastic cover.
Drilled 4 holes each on it, 2 for the upper mounting which goes behind the givi rack's mounting frame and 2 for the lower frame.
Got a hanger from a drawer ( unexpectedly, it was the same size as the givi frame ) and drilled 2 holes into it.Only on side!
Bought some self-locking nuts ( M6 and M8 ).
Vinyl wraped the parts to black and fitted together, than installed on the bike.
Finally, it holds the soft baigs straight enough.
(sorry for the quality, they were taken by a phone)
On the 1st pictures here they are, almost under the seat, with no support frame.
So I decided to create a side holder - it took me 2 weeks to figure out which would be the best solution for this. And also the cheapest.
Got a pair of 15" monitors' flat stand and removed the plastic cover.
Drilled 4 holes each on it, 2 for the upper mounting which goes behind the givi rack's mounting frame and 2 for the lower frame.
Got a hanger from a drawer ( unexpectedly, it was the same size as the givi frame ) and drilled 2 holes into it.Only on side!
Bought some self-locking nuts ( M6 and M8 ).
Vinyl wraped the parts to black and fitted together, than installed on the bike.
Finally, it holds the soft baigs straight enough.
(sorry for the quality, they were taken by a phone)