Custom brake pedal

[alexram]

Hey folks,

I've installed lowered foot pegs (40mm) on my 2016 Honda NC700XD and I like them, but I found that original brake pedal is not really comfy now. I have to turn my feet to press on it.
I am curious, did someone change that pedal?

 

[Rydinon]

Brake pedal looks like mine (2021), neither the shoe nor your pants look like mine. If you follow the aft end of the arm up behind the frame, you will see a threaded rod where you can adjust the position of the pedal up or down (not in or out). No idea if anyone makes an aftermarket brake pedal.

 

[The Phoenix]

After changing my foot pegs I bought a brake pedal extension however I have a MY 2021. After further investigation it does not appear that the manufacturer identifies a similar part for a 2016 Honda NC700xd. Click on the link and ask customer service if it would fit on your 2016 as it just slips and tightens over the original brake pedal on mine.

 

[alexram]

@Rydinon I know about that rod, you can adjust the pedal up and down using that threaded rod, but I want to move the lever outward to have that pedal under my foot. I think it would be more useful to have it in that way, it will reduce the time needed to press the rear brake, like having a couple fingers on the front brake lever.

 

[670cc]

To the OP, attached is a photo of my stock brake pedal and stock pegs on a manual transmission NC. I have no issues at all with the pedal placement. To me, it looks like your lever may be bent inward slightly, but camera angle might be making it appear that way. In any event, the drop arm on your aftermarket peg is spacing your peg farther outward, aggravating the peg/pedal offset. Since the aftermarket pegs moved your feet outward, I guess you’ll need to find a way to extend the brake pedal tab outward.

 

[alexram]

yeah, seems I need to bent it to make it more comfortable to me.