TGorman
Member
I see what you did there.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Dimotiv radiator protector
Dimotiv foot enlarger
Dimotiv sprocket cover
I like their radiator cover, the dual-layer type. But this engine guard has me lusting a bit more yet, and it looks especially good for tank panniers too --
NC700X Upper Engine Guard
Here's one of the six photos on the site:
Bama,2012 Manual
Dale Skidplate
Dale rear seat plate
Dale folding shifter
SWMotech crash bars
RaceTech gold valves
1" fork extenders
Nitron fully adjustable shock
Cycle Gear handguards
Had a fender extender but broke it. Need to make a flexible rubber one
Dimotiv radiator protector
Dimotiv foot enlarger
Dimotiv sprocket cover
Homemade fender lift
Seat Concepts
Mosko back country luggage on SWMotech Racks
2 teeth up on rear sprocket to match larger rear tire. Will go 3 teeth next time
1 tooth down on front sprocket
I have ran Shinko 705s
Currently run TKC80 front in stock size. Going to try the 120/80 (or is it 120/90) next
On Rear have run Pirelli Scorpion Rally and Kenda Big Block. Currently run Mitas E07
All of my photos are re-runs. Due to an injury I haven't been able to ride much this year.
Not the good ones...the wrong ones ... stock BT-023 that were in the garage since I bought the NC...seeing the mud begs the question, 2brnut2b: which tires? ; }
On my son Max's CB500X once the seat is off everything is pretty easy to get to including the air cleaner which is just forward of the battery. The side panels are flexible plastic held on with 3 bolts each side. The only major problem I see is getting to the shim and bucket valves every 30,000 miles, his bike at 32,000 miles will be a little overdue for a valve check when we get the bike back on the road next Spring.