wrksux
New Member
Made a pair a few years back for the bags on my ST1300. Made one this spring for the NC.
Duplicate key cut by my local lock & key dealer for $3.00 Plug for 1/2" sq. tubing from hardware store.
JB Weld to secure the key.
The square knob is easier to turn, as it is easier to grip than the round.
(The GPS is a std. RAM Handlebar Rail Mount base I had from an ATV mount, bored the holes to handlebar bolts (8mm ???))
** NOTE - If use the Handlebar mount you will need to get longer bolts! Also you will NOT be able to get a socket on the bolts to torque them. Should probably use socket head bolts.
Duplicate key cut by my local lock & key dealer for $3.00 Plug for 1/2" sq. tubing from hardware store.
JB Weld to secure the key.
The square knob is easier to turn, as it is easier to grip than the round.
(The GPS is a std. RAM Handlebar Rail Mount base I had from an ATV mount, bored the holes to handlebar bolts (8mm ???))
** NOTE - If use the Handlebar mount you will need to get longer bolts! Also you will NOT be able to get a socket on the bolts to torque them. Should probably use socket head bolts.
Last edited: