Bskicrash1
Active Member
- Joined
- Jul 11, 2021
- Messages
- 207
- Reaction score
- 246
- Points
- 43
- Location
- New Berlin, New York
Does anyone here have experience with the 12 O’clock labs SpeedoDRD H3 speedometer calibrator for the NC? The website lists that is is available for the NC700 but not the NC750. I’ve emailed the company but have yet to receive a response.
The unit has a wiring harness that connects to the factory Honda speed sensor connector. I wanted to confirm if anyone on this forum has used this product on the NC750. I was hoping the sensor from the 700 is the same on the 750.
Otherwise the only other option I know of is the SpeedoHealer SH-V4.
I’ve used 12 O’Clock Labs products twice in the past and they have great quality. I trust the brand. However, I would be willing to try the SpeedoHealer SH-V4 if necessary.
I’m running a 150/70-17 rear tire with a 16 tooth front sprocket and 46 tooth rear sprocket on my manual 2019. The Speedo error is too much for me and I have to fix it.
Thank you
The unit has a wiring harness that connects to the factory Honda speed sensor connector. I wanted to confirm if anyone on this forum has used this product on the NC750. I was hoping the sensor from the 700 is the same on the 750.
Otherwise the only other option I know of is the SpeedoHealer SH-V4.
I’ve used 12 O’Clock Labs products twice in the past and they have great quality. I trust the brand. However, I would be willing to try the SpeedoHealer SH-V4 if necessary.
I’m running a 150/70-17 rear tire with a 16 tooth front sprocket and 46 tooth rear sprocket on my manual 2019. The Speedo error is too much for me and I have to fix it.
Thank you