Swsws1
New Member
Ok so i just got done installing the soupys adjustable lowering links and lowered the rear 1in. Before installing them and while the bike was on the ground i put a digital angle finder on the frame and had a downward slope of 7.2deg down. After installing the links and adjusting them to a more comfortable height which just happened to be 1in i put the digital angle finder back onto the exact same spot on the frame and had a reading 8.1deg down. With that minute of an angle change is it really necessary to lower the front to get the exact same geometry? 1deg is not much at all. Thoughts?